EN10305-4 tubería de acero DOM sin soldadura en frío
Información básica
Modelo: EN10305-4
Descripción del producto
Descripción de los productos:
EN10305-4 Tubo de acero DOM sin soldadura en frío para sistemas de energía hidráulica y neumática
China DOM Steel Tubes proveedor y fabricante, ofrecen bajo precio, ingeniería de alta calidad de acero especial, tubos de acero sin soldadura DOM, tubería de acero DOM, etc.
Acero grado / acero Material:
Composición química (análisis de colada) a
Steel Grade | % by mass | ||||||
Name | Number |
C max |
Si max |
Mn max |
P max |
S max |
Altot min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.015 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.015 | - |
E355b | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.015 | - |
a Elements not included in this table (but see footnote b) shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process. b Additions of Nb, Ti and V are permitted at the discretion of the manufacturer. The content of these elements shall be reported. |
Propiedades mecánicas a temperatura ambiente
Steel Grade | Yield strengtha | Tensile strength | Elongation | |
Name | Number |
ReH min Mpa |
Rm min Mpa |
A min % |
E215 | 1.0212 | 215 | 290 to 430 | 30 |
E235 | 1.0308 | 235 | 340 to 480 | 25 |
E355 | 1.0580 | 355 | 490 to 630 | 22 |
a For tubes with outside diameter ≤ 30 mm and wall thickness ≤ 3 mm, the ReH minimum values are 10 MPa lower than the values given in this table. NOTE: The steel grades defined in this part of EN 10305 have an intrinsic minimum transverse impact energy of 27 J at 0 °C. |
Condición de entrega:
+ N
Rango de tamaño:
OD: 4.0-220 mm
WT: 0.5-30 mm
Longitud: max 7000mm
Característica del tubo de acero DOM:
Buena concentricidad
Buena tolerancia de OD e ID
Alta precisión
Calidad estable
Rugosidad suave
ASEGURAMIENTO DE LA CALIDAD TORICH
Procesos de producción:
Tubo sin soldadura y Cold Drawing o Cold Rolling Production
Materia prima Tubo de acero:
Dibujo en frío de la línea de producción:
Inspección de calidad para la dimensión:
Prueba de corriente Eddy y prueba ultrasónica:
Inspección de calidad en el laboratorio:
Embalaje:
EN10305-4 tubería de acero DOM sin soldadura en frío
China DOM Steel Tubes proveedor y fabricante, ofrecen bajo precio, ingeniería de alta calidad de acero especial, tubos de acero sin soldadura DOM, tubería de acero DOM, etc.
Tubos de acero DOM Steel Tube
Grupos de Producto : Tubos de acero DOM